USGS Stream Data

Kenai Rvr @ CooperLndg

  • Water Temp: 33.8 ° F
  • Flow: 484 ft³/s
  • Water Level: 5.11 ft
USGS

Middle Kenai @ Skilak

  • Flow: 893 ft³/s
  • Water Level: 6.11 ft
USGS

Talkeetna Rvr

  • Water Temp: 32 ° F
  • Water Level: 4.06 ft
USGS

Situk Rvr

  • Water Temp: 36.86 ° F
  • Flow: 180 ft³/s
  • Water Level: 65.57 ft
USGS
Ask About Fly Fishing

Posts Tagged ‘smelts’

Tubular Smolt – Tying instrucions

The Tubular Smolt came from my desire to have a fly that imitated the young fish I grew up seeing in the shallows of lakes. In my younger days we had small Flatfish and Rapalas for our ultra-light spinning rods. Once I started fly fishing I missed that basic minnow shape, and the desire to imitate it never really left the part of my brain that fishes. When I began learning more about bait fish, I kept thinking that there had to be a way to create a pattern that would mimic the head down attitude of a crippled fish. I also reasoned that a pattern that floated head down could be twitched back to horizontal creating an impression of struggling to stay alive. I wasn’t so concerned about movement, there are plenty of flies for that, I was mostly focused on size, color, and shape.

Although I had played with a few different patterns over the years, it was the thermometer probe cover that finally got my creative juices flowing. Here was the shell for an underbody. I knew I wanted to use Mylar tubing as an outer cover; all I had to do is figure out a way to get this long, thin walled tube onto a hook. After a few failed attempts at prototypes I became frustrated in that I just could not come up with a way to create a solid enough union to a hook to tie materials onto and over the tube. So the probe covers sat in my material box for almost a year. Then, while looking at some tube fly materials, I noticed cone heads designed for small tubes. “Tube flies” I thought, (mentally smacking myself on the side of the head) that’s the answer! I had toyed tying tube flies in the past, but being a bit of a traditionalist, I had failed to think past the shanked hook school of design when working on this baitfish imitation.

It took three attempts to create a tube fly that suspended head down, looked like a small fish, and did not have the disadvantage of an extra-long hook shank. The material sizes listed in the instructional PDF are based on getting the fly to suspend with neutral density. I’ve since subsisted foam for the head, for a high floating fly, and I’ve been stuffing the front part of the probe cover with fluorescent glo-bug yarn and/or Everglow fibers. You can alter the length of the body to create a shorter or longer baitfish and color the body to match any local baitfish. It is important that the body (Mylar tubing) be sealed. I’ve used regular epoxy, rod wrapping epoxy, and am currently playing with a couple different UV cured coatings. All seem to have their pros and cons. I use nail polish, especially ones with sparkle, to add color and extra bling to the body. Once you have the basic pattern, variations are endless.

Rainbow that took Tubular Smolt on the Agulawok River

Rainbow that took Tubular Smolt on the Agulawok River

The pattern’s name come from the fact that I now fish areas where salmon smolts are a prime baitfish; and the fly has proven itself on a couple of different river fisheries for rainbows. The interesting point is that I’ve yet to get the chance to fish one in a lake, where the process started years ago. But then, life is still young!

For a PDF of the Tying Instructions for this pattern, go to our Patterns page.

If you have questions or other comments, please feel free to post them here or email me at Rich@2GuysFlyFishing.net.

Share