Archive for the ‘Fly Fishing’ Category

This adventure (or mis-adventure) was mention in my post about our three day fishing trip on the Kenai River this June. Since I had the new GoPro mounted on the pontoon railings I had the opportunity to capture footage that will save this moment (actually two hours) forever.

I hope you enjoy, please share.

Rich

Kenai River Opener: June 11^th – 13^th

As we have for the last few years; Lance, Dennis, & I took three days at the beginning of the season opener to float fish the Kenai River. The campground is in Cooper Landing, right on the river. Actually, it’s our campsites that are right next to the river, giving us the prime location for launching our pontoon boats.

Speaking of boats… I have a new one! It’s the 9’ Sportsman Warehouse special from Outcast.

I reversed the tubes as I didn’t receive any discount that warranted free advertising on the river. I’m planning on getting vinyl banners printed and attached to the tubes that will promote 2 Guys Fly Fishing (and my photography business if my lovely partner gets her way).  Anyway, the boat is solid and handled well, and considering the price point, a great deal.

The Kenai River was high, up to its banks, and we saw higher water each day, thanks to the stick marker put in by Dennis. With the high water came low water clarity. Both of these contributed to poor fishing.

Read the rest of this entry »

Ready to Launch

Occasionally I think I lead a charmed life. Not so much for the fame & fortune I’ve avoided, but for things that happen in my life that convince me that Karma, Guardian Angels, and River/Fish Gods are entities that you should never take lightly. Also, that safety first is a great policy to live by.

Sunday was supposed to be a relaxing day floating the upper Kenai River. Lance has a new Fish Cat Scout raft that he wanted to try out on moving water, and since the river is closed to fishing, we were anticipating a very relaxing day trip; looking for photo ops, and scouting locations for next Tuesday when the river does open for fishing.

This was not to be.

Read the rest of this entry »

Finally… a day of fishing! Our first trip out was about 10 days later than normal this year. The water levels on the Talkeetna River stayed very low due to a cold spring, and when they did come up enough to get a jet boat upstream, it was a matter of juggling three different schedules on short notice to make a date for Friday, May 24th.

Tri-River Charters ran us and our pontoon boats up river on their 21’ Woolrich. Strap three 9’ boats to the back of a river boat, add the three of us, two additional anglers headed upstream, plus the captain, and you have a full boat. Good news is that we were able to get a “freight run” price which kept the trip really reasonable, dollar wise. We asked to be dropped off just upriver from Fish Creek; and geared up our boats against a steep bank.

10:00AM launch – 11:00AM fishing: not bad.

We were greeted by sheets of bank ice on much of the river. It looked more like early May as opposed to the third full week into the month. However, the day was absolutely gorgeous, with sun all day long and temperatures that had to be in the 70’s. It was a weird way to fish; being almost too hot in shirt sleeves, while casting our flies into water that was cold and off color from ice and run off. It didn’t take us long to realize that the main stem Talkeetna was turning darker as we watched. Visibility went from almost a foot in the morning at the launch site to about 6” in just a few hours. We decided to concentrate on the areas where clear water from Fish Creek and Clear Creek mixed with the Talkeetna. Read the rest of this entry »

This Spring at the Great Alaska Sportsman’s Show I watched a demo for a product being sold through Mountain View Sports called Hevi-Beads. Back too them in a minute…

Now anyone who knows me very well knows that Rich and I have not been great fans of the practice of using beads for trout despite their undeniable effectiveness. They just didn’t seem to be flies to us. So a couple of years ago we set out on a quest to come up with a way to fish beads – with the ability to make quick changes – and we came up with the Select-A-Bead system. A fly with a plastic tag that could be threaded through the bead (or two) and allow you to fish it like a bead head. We’ve tried them in a variety of patterns from standard eggs through Wooly Buggers and Bunny flies to Sculpins. Sometimes they work sometimes they don’t. We had days where they outfished everything else in the box and days where they didn’t catch a thing but regular beads on the line above a bare hook caught many. It was very frustrating.  Read the rest of this entry »

Fishing for Tarpon from a float tube…

Nuts, maybe, but we approve of this! Next summer we’re thinking of going out for Salmon sharks in ours… Let’s dangle our legs in the water around something thata can bite back!!

Tapâm – a flyfishing journey from tapamthemovie on Vimeo.

“Fly Fishing in Salt Waters” started this. Read the whole story HERE.

A simple to tie strong knot for tippet to hook eye connections. Try it! You’ll Like iT!

Jack’s Knot – line to hook knot used primarily to tie tippet to a hook for fishing. from Jonathan Palmer on Vimeo.

For most Alaskan fly fishers spring brings melting snow and thoughts summer fishing, with (hopefully) sunshine and green things growing everywhere.  But some of us have discovered we can have frys with our spring.

Salmon eggs laid last fall have been hatching under the ice, slowly developing into alevins (yoke sac fry). As ice pulls away from the spawning beds, the alevin, having used up their yoke sac, become fry. New fry swim to the surface, gulp some air to fill their air bladder, and begin free swimming and feeding. It’s at this point in their young lives that fry become available to all the other fish that have been on minimum rations through winter.

Read the rest of this entry »

From our friends at Southern Culture On the Fly – Safe Hook Removal. Not a pleasant thought but invaluable when it happens to you or your friend.

These folks also provide another exceptional internet based magazine. Take a look here.

The Tubular Smolt came from my desire to have a fly that imitated the young fish I grew up seeing in the shallows of lakes. In my younger days we had small Flatfish and Rapalas for our ultra-light spinning rods. Once I started fly fishing I missed that basic minnow shape, and the desire to imitate it never really left the part of my brain that fishes. When I began learning more about bait fish, I kept thinking that there had to be a way to create a pattern that would mimic the head down attitude of a crippled fish. I also reasoned that a pattern that floated head down could be twitched back to horizontal creating an impression of struggling to stay alive. I wasn’t so concerned about movement, there are plenty of flies for that, I was mostly focused on size, color, and shape.

Although I had played with a few different patterns over the years, it was the thermometer probe cover that finally got my creative juices flowing. Here was the shell for an underbody. I knew I wanted to use Mylar tubing as an outer cover; all I had to do is figure out a way to get this long, thin walled tube onto a hook. After a few failed attempts at prototypes I became frustrated in that I just could not come up with a way to create a solid enough union to a hook to tie materials onto and over the tube. So the probe covers sat in my material box for almost a year. Then, while looking at some tube fly materials, I noticed cone heads designed for small tubes. “Tube flies” I thought, (mentally smacking myself on the side of the head) that’s the answer! I had toyed tying tube flies in the past, but being a bit of a traditionalist, I had failed to think past the shanked hook school of design when working on this baitfish imitation.

It took three attempts to create a tube fly that suspended head down, looked like a small fish, and did not have the disadvantage of an extra-long hook shank. The material sizes listed in the instructional PDF are based on getting the fly to suspend with neutral density. I’ve since subsisted foam for the head, for a high floating fly, and I’ve been stuffing the front part of the probe cover with fluorescent glo-bug yarn and/or Everglow fibers. You can alter the length of the body to create a shorter or longer baitfish and color the body to match any local baitfish. It is important that the body (Mylar tubing) be sealed. I’ve used regular epoxy, rod wrapping epoxy, and am currently playing with a couple different UV cured coatings. All seem to have their pros and cons. I use nail polish, especially ones with sparkle, to add color and extra bling to the body. Once you have the basic pattern, variations are endless.

Rainbow that took Tubular Smolt on the Agulawok River

The pattern’s name come from the fact that I now fish areas where salmon smolts are a prime baitfish; and the fly has proven itself on a couple of different river fisheries for rainbows. The interesting point is that I’ve yet to get the chance to fish one in a lake, where the process started years ago. But then, life is still young!

For a PDF of the Tying Instructions for this pattern, go to our Patterns page.

If you have questions or other comments, please feel free to post them here or email me at Rich@2GuysFlyFishing.net.